Wired radar sensor for continuous level measurement For standard measuring tasks, IP66/IP68, type 6P Application area Axial cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval VEGAPULS C 21 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations and rain overflow basins, for flow measurement in open channels and level monitoring. Your benefit Exact measurement results independent of medium, process and environmental conditions High accuracy and wide measuring range Maintenance-free operation due to non-contact 80 GHz radar technology

The VEGASWING 61 is a universal level switch for use in all liquids. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The instrument can be used as empty or full detector, as approved overfill protection, dry run protection or pump protection in vessels and pipelines. The VEGASWING 61 offers maximum reliability in a wide application range.

The VEGAVIB 61 is a level switch for granular and coarse-grained bulk solids. The VEGAVIB 61 detects reliably and accurately the min. or max. limit level. The smooth surface of the vibrating rod, without corners and edges, avoids jamming of the bulk solid and is easy to clean.

The VEGAWAVE 61 is a level switch for universal use in powders and fine-grained bulk solids. The level switch detects reliably and robust the min. or max. limit level. The tuning fork is ideal for use either in adhesive and abrasive products as well as in bulk solids with very low density.

The VEGABAR 82 pressure transmitter can be used universally for the measurement of gases, vapours and liquids. Substances such as sand can be handled easily thanks to the abrasion-resistant ceramic measuring cell. The VEGABAR 82 offers maximum reliability. The transmitter can be used in all industries. The simple connection of VEGABAR series 80 sensors as electronic differential pressure opens new possibilities for the measurement of differential pressures.

Application Ventex explosion isolation valves prevent propagation of dust explosions by blocking the shock wave and flame front. Ventex valves are passive valves meaning they will close without requiring any external energy input. Ventex valves are suitable for low dust load process streams containing up to max. 50 g.m-3 of dust and are typically used to protect dryers, mills, filters, cyclones, etc. Ventex features - Certified for metallic and organic dust, gas or hybrid mixturesc - Stainless steel internal parts - Can be mounted horizontally or vertically (option) - Easy to maintain - ANSI flanges available on request - Housing in coated or stainless steel - Easy to reset following an activation - Wide range of position indicatores available - Certified according ATEX 2014/34/EU en EN 15089 Versions and sizes ATEX certified Ventex valves are available in three versions in sizes DN100, DN150, DN200, DN250, DN300, DN400, DN500 and DN600. - ESI-S: “single acting” stops explosion comming from one direction - ESI-D: “double acting” stops explosion comming from both directions - ESI-C: “check valve” Maintenance and revision Contact StuvEx for regular maintenance and revision of your Ventex explosion isolation valve. StuvEx is an (by producer) certified Ventex repair center.

Ideal mixing quality for dry, moist and viscous materials at variable filling levels The spiral mixing blade of the conical mixer initiates a three-dimensional flow of the mixing goods; creating a helical upward movement on the periphery and downward flow in the center. This blender guarantees very good mixing results and complete discharge. It can be used as powder blender for dry powder, wet suspensions as well as liquids, paste and dough. The vertical mixer can be designed for compliance with FDA and 3-A Sanitary Standards to be used as a sterile mixer and reactor which also meets EHEDG requirements. Further characteristics of the powder blender and conical mixer - If the mixing process requires deagglomeration, high speed cutting rotors can be installed. - The mixing device is driven from the top, using only a single top bearing. - The conical mixer meets all industry standards for surface finish, including sanitary and pharmaceutical requirements. - Jacketed and vacuum rated versions are an ideal vacuum dryer or reactor.

For the vertical ribbon mixer, Heilig Mixers applies high grades of stainless steel and a specific limited height design. This mid shear mixer is commonly used in the food industry because of its easy cleanability. You may also come across the names vertical mixer, ribbon blade mixer or ribbon blender machine. The top-driven mixing blade offers a three-dimensional mixing movement which guarantees a high accuracy over a short mixing time with both dry substances and pastes. As opposed to the Conical mixer, the ribbon activates the full content rendering a more intensive mixing procedure. Mixing intensity starts at about 15 W per kg.

FOR SHORT BATCH CYCLE TIMES The vertical ribbon mixer (also known as vertical mixer, ribbon blade mixer and ribbon blender machine) features high grades of stainless steel and has a specific design (less high). This mid shear mixer is commonly used in the food industry thanks to the fact that it is extremely easy to clean. The top-driven mixing blade offers a three-dimensional mixing movement which guarantees a high accuracy over a short mixing time with both dry substances and pastes. As opposed to the conical mixer, the ribbon activates the full content creating a more intensive mixing process. Mixing intensity starts at about 15W per kg. The ribbon screw allows for a short mixing time because of the intensive mixing process. In most cases a few minutes is sufficient. Materials that can be mixed in this particular blender are among others: powders, liquids, pastes and doughs. The conical bottom provides an excellent discharge of the mixed materials, and the extra-large inspection hatch makes the vertical ribbon mixer easy accessible thus easy to clean. We can also supply a cost-efficient ribbon mixer designed with a flat bottom. We have a stainless steel test mixer with a capacity of 200 litres with a mixing accuracy to a ratio of 1:100,000 (quality assurance certification by notified body) available for you to try out. Feel free to make an appointment by e-mail info@heiligmixers.com.

The Vertical Ribbon Screw Mixer is used for production of a wide range of products, such as food, pet food, plastics, pharmaceuticals and chemicals. This mixer is especially recommended for fast mixing of powders and pastes, and still guarantees a high mixing accuracy. Advantages: • Mixing accuracy of at least 1:100.000 (depending on the product) • Short mixing time • Compact design • Easy to clean • Full discharge

The spiral mixing blade inside the ribbon blender initiates a three-dimensional flow of the mixing goods; creating a helical upward movement on the periphery and downward flow in the center. This industrial mixer guarantees very good mixing results and complete discharge. It can be used as ribbon blender for dry powder, wet suspensions as well as liquids, paste and dough. The vertical mixer can be designed for compliance with FDA and 3-A Sanitary Standards to be used as a sterile mixer and reactor which also meets EHEDG requirements. Further characteristics of the single-shaft mixer / ribbon blender: - If the mixing process requires deagglomeration, high speed cutting rotors can be installed. - The ribbon blender is driven from the top, using only a single top bearing. - The mixer meets all industry standards for surface finish, including sanitary and pharmaceutical requirements. - Jacketed and vacuum rated versions are an ideal vacuum dryer or mixing reactor.

Best mixing quality for dry, moist and viscous materials at variable filling levels The spiral mixing blade of the vertical mixer initiates a three-dimensional rearrangement of the mixing goods. This vertical mixer guarantees best mixing results. It can be used for dry powder, wet suspensions as well as liquids, paste and dough. The vertical mixer can be designed for compliance with FDA and 3-A Sanitary Standards to be used as a sterile mixer and reactor which also meets EHEDG requirements. Further characteristics of the vertical mixer: - The clockwise driven spiral tools initiate a three-dimensional flow of the mixing goods creating a spiral upward movement on the peripheries and downward flow in the center combined with horizontal cross flows. - Vertical mixers can be used if a combination of heavy duty and very gentle mixing tasks have to be done subsequently. - It can be used as a powder blender for dry powder, wet suspensions as well as liquids, paste and dough. - If the mixing process requires deagglomeration, high speed cutting rotors may be mounted. - For dry, moist and viscous materials. Technical ideal mixing qualities can be guaranteed independent of filling level (10 to 100 % of the net volume), rpm-value of the mixing tools and characteristics of the mixing goods (for example: different bulk densities, particle sizes, flow abilities) - Each vertical mixing device is driven from the top, using only a single top bearing. - The twin shaft mixer meets all industry standards for surface finish, including sanitary and pharmaceutical requirements.

Vervanging van bestaande aandrijfgroepen met koppelingen en eventuele tussenchassis

This screening machine is suitable for all kinds of control- and safety screening with high capacities for dry and liquid products.