The “ALPHA Large Cleaners” series consists of ultrasonic cleaning baths specifically designed to meet precise and difficult cleaning requirements. ALC baths are designed for cleaning large parts in the petrochemical and transportation industries. These baths are also used for surface preparation or pretreatment in many other industries.

This large-volume mixer is a new development. It requires only low electrical connected loads. It mixes accurately, effectively and very gently. Gyraton® mixers are also particularly cost-effective because they require very little installation space. The properties of the mixing goods are irrelevant. Even moist or poorly flowing materials (time-solidifying materials) are homogenized. The function is similar to all other amixon® mixers. But the specific energy input is lower with the Gyraton® mixer. The mixer spiral rotates slowly and conveys the mixed materials upwards. It always touches only a part of the mixing chamber wall. In addition to rotation, the mixer shaft performs a circular path above the mixing chamber floor. The pivot point of the shaft lies in the plane of the gas-tight shaft seal. The entire cylinder surface is tangent to the mixing element spiral. This also applies to the bottom. Mixing takes place without dead space because the base is designed as a calotte. The lower mixing unit arm has the same curvature as the calotte shell. The mixer shaft is only supported and driven at the top. The shaft sealing is permanently hygienic and gas-tight. The unit shown here can homogenize 70 m³ of mix. This is the content of a 40-foot deep-sea container. This mixer design requires very little installation space. The mixer can optionally have one or more discharge nozzles. In the amixon® pilot plant, such a Gyraton® mixer is available for tests. The usable volume is 3 m³. From the measurement data that amixon® obtains during the mixing test, we can calculate very accurate design data for larger Gyraton® mixers.

Anode bags and cathode bags are mainly used in the metal industry. They are used for the sheathing of anode plates in electroplating baths for the reception of solid particles from gases or liquids. The anode bags are available in different materials. Permeability and chemical resistance are important parameters. The anode bags are usually made of 100% polypropylene for its resistance to acid.

Apex Screener The Apex screening machine combines Gyratory Reciprocating Motion with an ergonomic design which increases productivity while reducing overall downtime. Both maintenance and inspection of the Apex machine can be conducted by a single operator, allowing for less downtime. All screens of the Apex can be inspected in less than 10 minutes and screens can be changed 80% faster. Operator lifted components weigh no more than 18.5kgs with an individual screen panel weighing 2.25kgs.

By vibrating objects with ultrasonic technology, bulk solids can be prevented from sticking to the wall so that hoppers, drop tubes and silos flow through again and bridging is prevented. Also screen decks can be vibrated by ultrasonic technology, which keeps them clean.

LDA assembles your custom solution, performs all testing and installs the solution on your site.

Adinex and IAB Ingenieurs organise various courses in the field of explosion safety and ATEX. The courses are organised in a modular way according to the IECEx modules 01-10.

Muller Beltex specialises in delivering high quality (ATEX) process monitoring systems for the agricultural and industrial bulk and processing industries. With our extensive product range and comprehensive know-how, we always find the right solution in any industry for the clear and efficient monitoring of your installation. This not only enhances safety of your environment, it also means fewer component replacements and lower maintenance cost. Belt misalignment, bearing temperature, slip detection and much more to prevent heat sources create a combustible dust explosion.

We prevent rust in rooms, dry products and can optimize production processes with the right air drying and treatment.

Since 1977, Ausloos Verpakkingstechniek supplies reliable and flexible packaging machines and customer-oriented solutions for bagging machines, palletising systems and pallet handling machines. Quality and service is the basis of our company and our partners. Our team is looking forward to present you the possibilities of our machines: bagging machines for every type of bag, palletizers that can handle every bag, box or barrel and the strong results of our pallet stretch wraps. Are you looking for a semi-automatic machine or a fully automated packaging line "turn key", you do not have to search further. In the Benelux we are distributor of several leading Italian producers, each specialist in a specific sub-area of the packaging process. The combination of their expertise and our experience and service gives you maximum security.

Delaere supplied a gaylord erecting system to a chemical company in the United States. Gaylords are octagonal boxes which are known in Europe as octabins. This machine is able to erect up to 50 gaylords/hour. A robot is picking up flat gaylord bodies from a stack. A gaylord body is being dropped on a “zero positioning plate” and subsequently picked up again by the robot. In a next step, the gaylord body is transferred to the gaylord erecting position where the gaylord is manipulated into its octagonal shape. From the top, a bottom sheet is inserted in the erected gaylord by means of another robot-hand installed on a gantry system. Simultaneously, a pallet is dispended to place the erected gaylord box on. Before the gaylords are picked up by an AGV, a bottle-shaped liner is automatically placed over the erected gaylord.

Hydrogen sulfide (H2S) and light mercaptans are common contaminants that must be removed from various gases such as air, CO2, natural gas, biogas and landfill-derived methane. Such Sulfur species are extremely corrosive and must be removed to meet fuel gas specifications, pipeline specifications and air quality regulations. We offer the AxTrap™ 4000 Series of dry, granular media scavengers to safely and effectively remove these common sulfur. AxTrap™ 4000 Series products is based on patented, proprietary mixtures of iron oxide adsorbent and/or mixed metal oxides – on an inert, inorganic carrier. The result is a particularly robust, granular adsorbent in which the metal oxide matrix provides a firmly bound active phase which is non-toxic, non-hazardous, non-pyrophoric and environmentally safe in both fresh and spent condition.

By using a robot, it is possible to pose an extremely variable number of micro quantities up to 10 kg in a fully automatic process. This is how AZO®RoLog and AZO®eDos replaces complicated and expensive manual weighing of micro quantities. The safety cage surrounding the robot provides complete protection for the product and the machine operator. This means extremely critical and harmful raw materials can also be dosed without difficulty. This system can be implemented in the pharmaceuticals, food, chemicals and plastics industries to meter pigments, dyes, aromas, additives, active substances and numerous other micro quantities. The modular structure also makes it possible to achieve maximum versatility, regardless of whether it is an individual solution or a solution integrated into the overall logistics system. Special advantages • High throughput and 24/7 production • Reduces costs and saves on resources • Extremely reliable • Flexible formulations • Reproducible dosing results • Consistent formulation accuracy • Easy to clean • Shielded work envelope • Dosing of extremely critical raw materials without operator contact • Simple to transport and easy to upgrade thanks to modular structure • Variable number of raw materials • Continuous traceability of batches • Tracking & tracing